| Rasp Components | |
| Eagle II Hub - 9” / 211 mm, 4 (8) Segments | Art. No: 111031 |
| TURBO Application (Special Cooling Channels / recommended) | Art. No: 111400 |
| Eagle II HD Spacer, 6 mm | Art. No: 111428 |
| Refills | |
| Eagle II (1 Set of 28) | Art. No: 121181 |
| Spacers Alu I-Beam | |
| Eagle II Aluminium I-Beam Spacers 3/8” | Art. No: 111383 |
| Eagle II Aluminium I-Beam Spacers 1/4” | Art. No: 111384 |
| Eagle II Aluminium I-Beam Spacers 3/16” | Art. No: 111385 |
| Spacers Alu I-Beam Air | |
| Eagle II Alu I-Beam Air Spacer 3/8” | Art. No: 111480 |
| Eagle II Alu I-Beam Air Spacer 1/4” | Art. No: 111481 |
| Pins | |
| Pins 5/16” 96 mm (Standard length) | Art. No: 111205 |
| Pins 5/16” 102 mm (Standard length) | Art. No: 111206 |
| Pins 5/16” Length on demand (less than 102 mm) | Art. No: 111207 |
| Pins 5/16” Length on demand (longer than 102 mm) | Art. No: 111208 |
Eagle II Turbo Rasp and Refill
Ø 9 Inch / 211 millimeters – 4 Segments
Next to the conventional rasps R-4 and R-115 we also offer the latest EAGLE II with Ø 9”. The EAGLE II rasp is very successful on Bandag buffing machines and provides the following advantages:
- more cutting teeth in use
- more cutting angles
- consistent texture throughout the blade life
- shorter buffing cycles
- high productivity
- less downtime
- reduced cost per tire
Change to the new EAGLE II buffing system and save immediately. Developed and patented by B&J.
All Eagle II Components (Article No.’s) PDF